Galley and Nav-Station
The many details in the galley and at the chart table were a lot of work. But it was worth it, I’m happy with …
by on
in Allgemein
FLATPACK
235
Class Globe 5.80 Feed Aggregation
This an aggregated feed of Class Globe 5.80 build blogs which displays the 10 most recent blog posts from CG580 builders across the world.
Not all build blogs can be included - only blogs that have an Atom or RSS feed as these are the only ones that can be imported automatically. I have also de-listed some blogs where the content is not predominently CG580-related.
This list updates automagically every day at about 6am UTC. The last update was on Jan 22 2025 at 06:00:44 UTC.
27 grudzień 2024
Kończy się rok 2024, mógłbym się postarać o podsumowanie tego co udało mi się zrobić w tym roku. Sprawdziłem moje notatki w prowadzonym na bieżąco …
by on
in Bez kategorii
November 2024 : Final Month
Out of the shed to fit them mast Stood the mast & all fits well Two legend yacht riggers from Sydney , Westy & Gardo So much stuff …
by on
in
October 2024 : Electrical , Hydrovane , etc
Looking to Nav Station through port hole Electrical boxWesty hard at it again We won the Americas Cup in 1983 .... Can one of the …
by on
in
September 2024 : Topcoat painting , fitting out , deck layout
Into the spray booth. Kiwi Dave getting ready to top coat The old mast from my sabot that my grandfather built when i was 8 …
by on
in
August 2024 : Bowsprit , Dodger Coaming , Deck Layout , Weighing the Boat & Keel
Fitting Douglas Fir bowsprit Epoxy , fibreglass the tip of the bowsprit for strength and to prevent splittingSails arrived Marking out dodger coaming frameWeighing …
by on
in
HV na Class Globe 5.80Class Globe 5.80 niedługo wystartują do regat dookoła Świata. Otrzymałem pytania dotyczące zamontowania samosteru z dużą płetwą która …
by on
in
Some work in the back of the boat
Making progress in the back.I installed two walls under the cockpit floor to divide the aft section into three separate compartments. This is not …
by on
in Allgemein
Painstaking Paintwork Pt.1
Well, with all of the fairing finally done on the outside it was time to start getting it painted. I began inside, painting my way …
by on
in June 2024
Rudder construction
Rudder 1820mm x 405mm x 40mm laminated Douglas fir, recovered from granary - clean up 4000mm x 220mm, cut to 1840mm - set up table saw and …
by on
in rudder
